ASTM F136 Titanium Push Pin Threadless Hammer Effect Flat Disc Labret Helix Conch Lip Monroe Tragus 1.2mm 8mm - Choice of 2 Colours
Beautiful 3mm Push Pin Threadless Hammer Effect Flat Disc
Choice of 2 Colours:
Silver ASTM F136 Titanium
Gold Plated over ASTM F136 Titanium
Product Description:
Implant Grade ASTM F136 Titanium
Hand Polished
Lightweight
Push Pin/Threadless
Bar Thickness: 1.2mm (16 Gauge )
Bar Length: 8mm
Hammer Disc Top Size: 3mm
♥How do the Push Pin/Seamless Work♥
The Labret is already adjusted "TIGHTER FIT"; however should you want to increase or decrease the security of the fit to your tastes, adjustment is easy, (see picture above) or Follow the instruction below.
Please try the labret before adjusting the bend
♥How does it stay together?♥
The removable end has a small insertion pin (see picture above), which is slightly curved on all straight-shaft threadless jewellery, or unbent on all curved-shaft threadless jewellery. When inserted into the shaft, the curvature between the insertion pin and the inside of the shaft creates spring tension, holding the end securely in place. This is similar to a captive bead ring, where the natural spring tension of the metal holds the bead in place.
♥How do I adjust the fit?♥
The tension of the pin keeps the end securely attached to the shaft. The greater the bend in the pin, the greater the tension, and therefore a tighter fit.
1. Insert the pin about one-third to halfway into the shaft.
2. Bend the pin slightly. It is important that you make slight adjustments in the bend;over-bending could make the fit too tight.
3. Push the loose end back into the Labret and test the fit. If it is too tight, take some of the bend out of the insertion pin and try again.
All sizes are approximate and the photograph is not the actual size of the item. Please check all measurements before purchasing. I have taken the best picture possible, colours may vary from screen to screen.
Suitable for the following piercing:
Ear piercing
Cartlidge
Tragus
Labret
Lip
Madonna
Pinna
Monroe and many more
Jewellery Type - Labret
Please note this is for 1 single Labret if you require a pair or more select the amount.
This item will be posted out 2nd Class Recorded.
NO RETURNS DUE TO HYGIENE REASONS
Any question please send a message
ASTM F136 Titanium Push Pin Threadless Hammer Effect Flat Disc Labret 1.2mm 8mm
We do not accept returns on any body piercing jewellery due to the intimate nature of body piercing jewellery and to protect the health of our customers.